|
SYSTEM HS-50
Single speed pump on/off with 20 min. run timer and optional water level control.
|
|
SYSTEM HS-75
Variable speed blower on/off with wave & pulse mode, purge cycle and 20 min. run timer.
|
|
SYSTEM HS-100
Pump: Variable speed pump with wave mode, or single speed pump, water level control, programmable 30 min. run timer and lighting features.
Blower: Variable speed blower with wave and pulse mode, purge cycle, programmable 30 min. run timer and lighting features.
|
|
SYSTEM HS-101
Pump: Variable speed pump with wave mode, or single speed pump, water level control and 30 min. run timer. Only one of the following secondary options available: neck masseuse pillow / waterfall / back massage or lighting features.
Blower: Variable speed blower with wave and pulse mode, purge cycle and 30 min. run timer with lighting features.
|
|
SYSTEM HS-102
Variable speed pump with wave mode, or single speed pump, water level control and 30 min. run timer. Only two of the following secondary options are available: neck masseuse pillow and waterfall or two neck masseuse pillows. One "User" button that stores and retrieves one personal jetted bath preference setting.
Clear trim on all above keypads.
|
|
SYSTEM HS-215
Variable speed pump with wave mode, or single speed pump, water level control and programmable 30 min. run timer, variable speed blower with wave & pulse mode, purge cycle and programmable 30 min. run timer, neck masseuse pillow, waterfall, back massage and lighting features. Two "User" buttons that store and retrieve two personal jetted bath preference settings.
Please note: Only chosen features will illuminate on keypad.
Trim options for HS-215 keypad: White, Biscuit, Chrome and Brass.
Please note: You can add lighting features with an air button to any system that does not offer lighting features.
|
|
STANDARD
ADJUSTABLE/DIRECTIONAL
DESIGNER JET The adjustable flow directional designer jet is Hydro Systems
standard whirlpool jet. The direction of each jet is easily adjusted by
pointing the nozzle in the desired direction. The amount of water flowing
through the jet can be adjusted from full flow to completely off by rotating
the escutcheon. It is 2½" in diameter and is available in a wide variety of
colors and plated finishes.
|
 |
SWIRLING ADJUSTABLE
DESIGNER JET
The adjustable flow swirling designer jet is a popular upgrade from the
standard designer jet. Instead of pointing the nozzle in one direction, the
nozzle spins to provide a swirling, massaging flow of water. The amount of
flow can be adjusted by turning the escutcheon. The swirling designer jet is
also 2½" in diameter and is available in all of the same colors and plated
finishes as the standard designer jet.
|
 |
JUMBO JET
This optional extra large therapeutic jet was adapted from the outdoor spa
industry and adds new dimension to hydro massage bathing comfort and
enjoyment. It has a higher flow rate than the standard jet, but with less
velocity. This jet can be easily directed by pointing the nozzle towards the
desired location for a soothing, gentle massage. The amount of flow can be
adjusted, but not turned completely off, by turning the insert. This jet is
just over 3" in diameter and is available in many popular colors or with
plated metallic trim.
|
 |
JUMBO ROTATING JET
This extra large spinning therapeutic jet was also adapted from the outdoor
spa industry. Similar to the swirling designer jet, the jumbo rotating jet
provides a spinning, massaging action. Turning the insert adjusts the amount
of flow, but unlike the standard and swirling designer jets, does not turn
the flow completely off. This jet is just over 3" in diameter and is
available in the same popular colors and plated finishes as the Jumbo Jet.
|
 |
HAND-HELD
PERSONAL MASSAGE JET
This great option will provide you with great satisfaction for those
“hard-to-reach” areas needing hydrotherapy. The six foot long hose is
attached to its own jet, allowing you the flexibility to use it as a
hand-held massage jet or to remove it and use the jet as a normal jet.
|
 |
GRAB BARS
A set of these optional grab bars enhance the styling and add functionality
to any Hydro Systems bathtub. Designed to be mounted on most flat or curved
surfaces, these grab bars are designed for quick removal and remounting
without access to the backside of the tub.
|
 |
SAFETY SUCTION COVER
The anti-vortex suction is a stylish safety feature, designed to prevent
hair and foreign objects from becoming drawn in and trapped in the whirlpool
system. The suction cover and all whirlpool system trim components are
available in a wide array of colors and plated finishes to match or
complement any color whirlpool bathtub you select. The plated option is
electroplated over brass for a quality, durable, long-lasting finish and
value.
|
|
|
|
