|
Hydro Systems HS 6033 [6" dam] shower with 5 year limited
warranty, 60" Wide x 33" Deep x 77" High with 1" O.D. satin finish
stainless steel curtain rod, two built-in soap shelves, 36" satin finish stainless steel
grab bar on rear wall, 24" satin finish stainless steel grab bar on
side wall, 16" x 24" satin finish stainless steel grab bar on wet
wall, two built in soap shelves in rear corners,
center side drain with side sloping integrally molded slip-resistant
floor.
Units shall be molded of gel-coated fiberglass reinforced polyester
resin.
Units shall meet or exceed physical and performance requirement for
Type 2 gel-coated fixtures [of ANSI Z124.2 showers].
Standing/walking surfaces shall meet slip-resistance requirements of
Consumer Safety Specification ASTM F-462, with static friction
coefficient no less than 0.04. |
Handicapped grab bars shall be
nom. 1½" O.D. and support a minimum load of 250lbs. in accordance with the
Consumer Safety Specification ASTM F-446 and ANSI A117.1 guidelines.
Units shall have a flame spread rating of 200 or less and a smoke density
rating of 450 or less per ASTM E84.
Units shall bear or have a fixed to them a molded manufacturer's logo and/or
permanent label showing manufacturer's name and model number and the seal of
the Uniform Plumbing Code and shall be accompanied by detailed installation
recommendations.
Also affixed and for removal by the owner/occupant/user only, unit shall be
equipped with user maintenance instructions and the full text of the limited
warranty. As manufactured by Hydro Systems Inc. - Valencia, California.
|
