|
|
Features:
- Overall Dimensions installed:
60"W x 36"D x 77"H
- Fire Retardant Gel-coat finish
- Walls meet Class 1 and Class A ratings per ASTM E-84 Flame Spread and Smoke Density requirements for both inside and outside surfaces
- Galvanized steel reinforcing stiffeners
- Extra reinforcing in all critical areas
- Slip resistant floor
- Soap dish
- 21" x 42" Satin finish stainless steel grab bars horizontally mounted
- Choice of Naugahyde over foam rubber or a hard phenolic folding wheelchair transfer seat factory installed
- 60" Satin finish stainless steel curtain rod installed
- Drain is chrome-plated brass and included with shower
- Unit is packaged with cardboard box on forklift pallet
- Full LTL wooden shipping crate available
Standard,
code listings & approvals:
-
APMO/UPC
- Uniform Plumbing Code
-
ANSI-A117.1
- Accessibility and Grab Bar Guidelines
-
ASTM
E-84 - Flame Spread and Smoke Density
-
Consumer
Safety Specification ASTM F-642 and F-446
Warranty:
Hydro Systems
products are backed by our exclusive
5
Year Limited Warranty. (See warranty for complete details.)
|
|
|
Interior at
floor level |
Exterior
incl. 1" nail flange |
Height |
Drain
Location |
Entry
Width |
Threshold
Height |
Nail Flange |
Seat
|
Seat Height |
Soap Dish |
Curtain Rod |
# of Grab
Bars |
Grab
Bar
|
|
Model |
A
width
|
B
depth |
C
width |
D
depth |
E
finish |
F
overall |
G* |
H* |
I |
J |
K |
L |
M |
N |
O |
P |
Q |
HS 6036
BF |
60"
|
36" |
62" |
38" |
77" |
78" |
31" |
6" |
60" |
2" |
1" |
folding |
18" |
1 |
60" |
1 |
21"x42" h |
|
H* = from
side wall I*
= from back wall |
Grab
Bar
Height |
Grab
Bar |
Grab Bar
Height |
Grab
Bar |
Grab
Bar
Height |
Wet
Wall |
Column
Width
|
Seat |
Threshold
Width |
|
|
R |
S |
T |
U
|
V |
W |
X |
Y |
Z |
| 34.5" |
n/a |
n/a
|
n/a |
n/a |
back |
n/a |
n/a |
n/a
|
Suggested Mechanical
Specifications
Hydro Systems HS 6036 BF shower with 5 year limited warranty, 62" Wide x 38" Deep x 77" High with folding wheelchair transfer seat conforming to ADA accessibility standards, 1" O.D. satin finish stainless steel curtain rod, 21" x 42" satin finish stainless steel grab bars, center-rear drain with rear sloping integrally molded slip-resistant floor. Unit shall be molded of gel-coated fiberglass reinforced polyester resin. Units shall meet or exceed physical and performance requirement for Type 2 gel-coated fixtures [of ANSI Z124.2 showers]. Standing/walking surfaces shall meet slip-resistance requirements of Consumer Safety Specification ASTM F-462, with static friction coefficient no less than 0.04. Handicapped grab bars shall be nom. 1 1/2" O.D. and support a minimum load of 250 lbs. in accordance with the Consumer Safety Specifications ASTM F-446 and ANSI A117.1 guidelines. Units shall have a flame spread rating of 25 or less [ASTM E-84, E-162]; smoke density rating of 450 or less [E-84]; equal to Class A, NFPA, and Class 1, United Building Code. Units shall bear or have affixed to them a molded manufacturer's identification logo and/or permanent label showing manufacturer's name and model number and shall be accompanied by detailed installation recommendations. Also affixed and for removal by the owner/occupant/user only, unit shall be equipped with user maintenance instructions and the full text of the limited warranty. As manufactured by Hydro Systems, Inc. - Simi Valley, California.
|
