|
|
Features:
- Overall Dimensions installed:
60"W x 33"D x 77"H
- Fire Retardant Gel-coat finish
- Walls meet Class 1 and Class A ratings per ASTM E-84 Flame Spread and Smoke Density requirements for both inside and outside surfaces
- Galvanized steel reinforcing stiffeners
- Extra reinforcing in all critical areas
- Slip resistant floor
- Built-in seat
- Two built-in soap dishes
- 24" Satin finish stainless steel grab bar vertically mounted
- 36" Satin stainless steel grab bar horizontally mounted
- 16" x 24" Satin finish stainless steel grab bar mounted
- 52" Satin finish stainless steel curtain rod installed
- Drain is chrome-plated brass and included with
showe
- Unit is packaged with cardboard box on forklift pallet
- Full LTL wooden shipping crate available
Standard,
code listings & approvals:
-
APMO/UPC
- Uniform Plumbing Code
-
ANSI-A117.1
- Accessibility and Grab Bar Guidelines
-
ASTM
E-84 - Flame Spread and Smoke Density
-
Consumer
Safety Specification ASTM F-642 and F-446
Warranty:
Hydro Systems
products are backed by our exclusive
5
Year Limited Warranty. (See warranty for complete details.)
|
|
|
Interior at
floor level |
Exterior
incl. 1" nail flange |
Height |
Drain
Location |
Entry
Width |
Threshold
Height |
Nail Flange |
Seat
|
Seat Height |
Soap Dish |
Curtain Rod |
# of Grab
Bars |
Grab
Bar
|
|
Model |
A
width
|
B
depth |
C
width |
D
depth |
E
finish |
F
overall |
G* |
H* |
I |
J |
K |
L |
M |
N |
O |
P |
Q |
|
HS 6033 |
58"
|
32" |
60" |
34" |
77" |
78" |
9.5" |
16" |
52.5" |
6" |
1" |
fixed |
20" |
2 |
52" |
3 |
16"x24" h/v |
|
H* = from
side wall I*
= from back wall |
Grab
Bar
Height |
Grab
Bar |
Grab Bar
Height |
Grab
Bar |
Grab
Bar
Height |
Wet
Wall |
Column
Width
|
Seat |
Threshold
Width |
|
|
R |
S |
T |
U
|
V |
W |
X |
Y |
Z |
| 34.5" |
36"
h |
34.5"
|
24"v |
34.5" |
side |
3.75" |
15" |
3.75"
|
Suggested Mechanical
Specifications
Hydro Systems HS 6033
[6" dam] shower with 5 year limited warranty, 58" Wide x 32" Deep x 77" High with 1"
O.D. satin finish stainless steel curtain rod, 36" satin finish stainless steel grab
bar on rear wall, unitized 24" satin finish stainless steel grab bar on side wall,
16" x 24" satin finish stainless steel grab bar on wet wall, two built-in soap shelves,
center side drain with sloping integrally molded slip-resistant floor. Unit shall be
molded of gel-coated fiberglass reinforced polyester resin. Units shall meet or exceed
physical and performance requirement for Type 2 gel-coated fixtures [of ANSI Z124.2
showers]. Standing/walking surfaces shall meet slip-resistance requirements of Consumer
Safety Specification ASTM F-462, with static friction coefficient no less than 0.04.
Handicapped grab bars shall be nom. 1 1/2" O.D. and support a minimum load of 250 lbs.
in accordance with the Consumer Safety Specifications ASTM F-446 and ANSI A117.1
guidelines. Units shall have a flame spread rating of 25 or less [ASTM E-84, E-162];
smoke density rating of 450 or less [E-84]; equal to Class A, NFPA, and Class 1,
United Building Code. Units shall bear or have affixed to them a molded manufacturer's
identification logo and/or permanent label showing manufacturer's name and model number
and the seal of the Uniform Plumbing Code and shall be accompanied by detailed
installation recommendations. Also affixed and for removal by the owner/occupant/user
only, unit shall be equipped with user maintenance instructions and the full text of
the limited warranty. As manufactured by Hydro Systems, Inc. - Simi Valley, California.
|
