|
|
Features:
- Overall Dimensions installed:
44"W x 52"D x 74"H
- Fire Retardant Gel-coat finish
- Walls meet Class 1 and Class A ratings per ASTM E-84 Flame Spread and Smoke Density requirements for both inside and outside surfaces
- Galvanized steel reinforcing stiffeners
- Extra reinforcing in all critical areas
- Slip resistant floor
- Built-in soap shelf
- 21' X 42" Satin finish stainless steel grab bar horizontally mounted
- 24" Satin finish stainless steel grab bar vertically mounted
- Choice of Naugahyde over foam rubber or a hard phenolic folding wheelchair transfer seat factory installed
- 42" Satin finish stainless steel curtain rod installed
- Drain is brass body, self caulking with stainless steel strainer
- Unit is packaged with cardboard box on forklift pallet
- Full LTL wooden shipping crate available
Standard,
code listings & approvals:
-
APMO/UPC
- Uniform Plumbing Code
-
ANSI-A117.1
- Accessibility and Grab Bar Guidelines
-
ASTM
E-84 - Flame Spread and Smoke Density
-
Consumer
Safety Specification ASTM F-642 and F-446
Warranty:
Hydro Systems
products are backed by our exclusive
5
Year Limited Warranty. (See warranty for complete details.)
|
|
|
Interior at
floor level |
Exterior
incl. 1" nail flange |
Height |
Drain
Location |
Entry
Width |
Threshold
Height |
Nail Flange |
Seat
|
Seat Height |
Soap Dish |
Curtain Rod |
# of Grab
Bars |
Grab
Bar
|
|
Model |
A
width
|
B
depth |
C
width |
D
depth |
E
finish |
F
overall |
G* |
H* |
I |
J |
K |
L |
M |
N |
O |
P |
Q |
|
HS 4452 |
42"
|
49" |
44" |
53" |
77" |
78" |
22" |
6" |
42" |
3" |
1" |
folding |
18" |
1 |
42" |
2 |
21"x42" h |
|
H* = from
side wall I*
= from back wall |
Grab
Bar
Height |
Grab
Bar |
Grab Bar
Height |
Grab
Bar |
Grab
Bar
Height |
Wet
Wall |
Column
Width
|
Seat |
Threshold
Width |
|
|
R |
S |
T |
U
|
V |
W |
X |
Y |
Z |
| 34.5" |
24"
v |
34.5"
|
n/a |
n/a |
back |
n/a |
n/a |
n/a
|
Suggested Mechanical
Specifications
Hydro Systems HS 4452 [3" dam]
shower with 5 year limited warranty, 44" Wide x 52" Deep x 77" High with folding
wheelchair transfer seat conforming to ADA accessibility standards, 1" O.D. satin finish
stainless steel curtain rod, 21" x 42" satin finish stainless steel grab bar on wet wall
and rear wall, 24" satin finish stainless steel grab bar on side wall, center-rear drain
with rear sloping integrally molded slip-resistant floor. Unit shall be molded of
gel-coated fiberglass reinforced polyester resin. Units shall meet or exceed physical and
performance requirement for Type 2 gel-coated fixtures [of ANSI Z124.2 showers].
Standing/walking surfaces shall meet slip-resistance requirements of Consumer Safety
Specification ASTM F-462, with static friction coefficient no less than 0.04.
Handicapped grab bars shall be nom. 1 1/2" O.D. and support a minimum load of 250 lbs. in
accordance with the Consumer Safety Specifications ASTM F-446 and ANSI A117.1 guidelines.
Units shall have a flame spread rating of 25 or less [ASTM E-84, E-162]; smoke density
rating of 450 or less [E-84]; equal to Class A, NFPA, and Class 1, United Building Code.
Units shall bear or have affixed to them a molded manufacturer's identification logo
and/or permanent label showing manufacturer's name and model number and the seal of the
Uniform Plumbing Code and shall be accompanied by detailed installation recommendations.
Also affixed and for removal by the owner/occupant/user only, unit shall be equipped with
user maintenance instructions and the full text of the limited warranty. As manufactured
by Hydro Systems, Inc. - Simi Valley, California.
|
