|
|
Features:
- Overall Dimensions installed:
42"W x 36"D x 77"H
- Fire Retardant Gel-coat finish
- Walls meet Class 1 and Class A ratings per ASTM E-84 Flame Spread and Smoke Density requirements for both inside and outside surfaces
- Built-in soap shelf
- Galvanized steel reinforcing stiffeners
- Extra reinforcing in all critical areas
- Slip resistant floor
- 18" Satin finish stainless steel grab bar horizontally mounted
- 24" Satin finish stainless steel grab bar vertically mounted
- 36" Satin finish stainless steel curtain rod installed
- Drain is brass body, self caulking with stainless steel strainer
- Unit is packaged with cardboard box on forklift pallet
- Full LTL wooden shipping crate available
Standard,
code listings & approvals:
-
APMO/UPC
- Uniform Plumbing Code
-
ANSI-A117.1
- Accessibility and Grab Bar Guidelines
-
ASTM
E-84 - Flame Spread and Smoke Density
-
Consumer
Safety Specification ASTM F-642 and F-446
Warranty:
Hydro Systems
products are backed by our exclusive
5
Year Limited Warranty. (See warranty for complete details.)
|
|
|
Interior at
floor level |
Exterior
incl. 1" nail flange |
Height |
Drain
Location |
Entry
Width |
Threshold
Height |
Nail Flange |
Seat
|
Seat Height |
Soap Dish |
Curtain Rod |
# of Grab
Bars |
Grab
Bar
|
|
Model |
A
width
|
B
depth |
C
width |
D
depth |
E
finish |
F
overall |
G* |
H* |
I |
J |
K |
L |
M |
N |
O |
P |
Q |
HS 4236
BF |
40"
|
35" |
42" |
37" |
77" |
78" |
21" |
6" |
36" |
2" |
1" |
folding |
18" |
1 |
36" |
1 |
24"x26" h |
|
H* = from
side wall I*
= from back wall |
Grab
Bar
Height |
Grab
Bar |
Grab Bar
Height |
Grab
Bar |
Grab
Bar
Height |
Wet
Wall |
Column
Width
|
Seat |
Threshold
Width |
|
|
R |
S |
T |
U
|
V |
W |
X |
Y |
Z |
| 34.5" |
n/a |
n/a
|
n/a |
n/a |
side |
3" |
n/a |
n/a
|
Suggested Mechanical
Specifications
Hydro Systems HS 4236 [4" dam] shower with 5 year limited warranty, 42" Wide x 36" Deep x 77" High with 1" O.D. satin finish stainless steel curtain rod, 24" long satin finish stainless steel grab bar on wet wall and an 18" long satin finish stainless steel grab bar on rear wall, two build-in soap shelves in rear corners, center drain with center sloping integrally molded slip-resistant floor. Unit shall be molded of gel-coated fiberglass reinforced polyester resin. Units shall meet or exceed physical and performance requirement for type 2 gel-coated fixtures [of ANSI Z124.2 showers]. Standing/walking surfaces shall meet slip-resistance requirements of Consumer Safety Specification ASTM F-462, with static friction coefficient no less than 0.04. Handicapped grab bars shall be nom. 1 1/2" O.D. and support a minimum load of 250 lbs. in accordance with the Consumer Safety Specifications ASTM F-446 and ANSI A117.1 guidelines. Units shall have a flame spread rating of 25 or less [ASTM E-84, E-162]; smoke density rating of 450 or less [E-84]; equal to Class A, NFPA, and Class 1, United Building Code. Units shall bear or have affixed to them a molded manufacturer's identification logo and/or permanent label showing manufacturer's name and model number and the seal of the Uniform Plumbing Code and shall be accompanied by detailed installation recommendations. Also affixed and for removal by the owner/occupant/user only, unit shall be equipped with user maintenance instructions and the full text of the limited warranty. As manufactured by Hydro Systems, Inc. - Simi Valley, California.
|
