|
|
|
System HS-50
Single speed pump on/off with 20 min. run timer and optional water level control.
|
|
|
|
System HS-100
Pump: Variable speed pump with wave mode, or single speed pump, water level control, programmable 30 min. run timer and lighting features.
Blower: Variable speed blower with wave and pulse mode, purge cycle, programmable 30 min. run timer and lighting features.
|
|
|
|
System HS-101
Pump: Variable speed pump with wave mode, or single speed pump, water level control and 30 min. run timer. Only one of the following secondary options available: neck masseuse pillow / waterfall / back massage or lighting features.
Blower: Variable speed blower with wave and pulse mode, purge cycle and 30 min. run timer with lighting features.
|
|
|
|
System HS-102
Variable speed pump with wave mode, or single speed pump, water level control and 30 min. run timer. Only two of the following secondary options are available: neck masseuse pillow and waterfall or two neck masseuse pillows. One "User" button that stores and retrieves one personal jetted bath preference setting.
Clear trim on all above keypads.
|
|
|
|
System HS-215
Variable speed pump with wave mode, or single speed pump, water level control and programmable 30 min. run timer, variable speed blower with wave & pulse mode, purge cycle and programmable 30 min. run timer, neck masseuse pillow, waterfall, back massage and lighting features. Two "User" buttons that store and retrieve two personal jetted bath preference settings.
Please note: Only chosen features will illuminate on keypad. You can add lighting features with an air button to any system that does not offer lighting features.
Trim options for HS-215 keypad: White, Biscuit, Chrome and Brass
|
 |
|
System HS-RC
The Hydro Systems Remote Control Panel puts the controls
right at your fingertips – wherever they happen to be. |
 |
|
Standard Builder Jet
The standard builder jet is a directional jet that has the added benefits of volume control, thus allowing you to increase or decrease the pressure of the massage in different directions. |
 |
|
Standard Adjustable/Directional Designer Jet
This is Hydro Systems standard whirlpool jet. It is directionally adjustable by moving the nozzle. The pressure is adjusted by rotating the jet from full flow to completely off.
|
 |
|
Swirling Adjustable Designer Jet
This popular upgrade provides a swirling, pulsating flow of water. Just as the Standard Adjustable/Directional Designer jet, the pressure is adjustable by easily rotating the jet face.
|
 |
|
Jumbo Jet
This optional, extra large therapeutic jet was adapted from the outdoor spa industry. This jet produces a higher water flow volume, with less velocity. It is fully adjustable, with directional and volume controls, providing a great option to a whirlpool system.
|
 |
|
Jumbo Rotating Jet
This extra large spinning therapeutic jet was also adapted from the outdoor spa industry. Similar in operation to the Swirling Designer Jet, this jet affords a rotational, pulsating action.
|
 |
|
Micro Therapy Jet
This jets’ unique size allows it to be placed in areas of the tub where a traditional jet will not fit. Many customers opt for these jets near armrests as hand, wrist or lower arm jets for carpal tunnel syndrome relief. This jet is volume controllable. |
 |
|
Back Masseuse System 1
These jets are available with the Back Masseuse System 1 and are installed in a series of 6 jets operated by a single volume control. A pulsation massage is creating by the swirling action of these jets, providing greater relief than a single jet. |
 |
|
Back Masseuse System 2
These jets are available with the Back Masseuse System 2 and are controlled by an electronic keypad. This 6 jet series offers direct flow onto your back. The electronic keypad directs the jets to operate in a Shiatsu pattern utilizing only two jets at a time, as well as the speed of transition from one pair of jets to another. |
|
|
|
Colonial Grab Bars
A set of these optional grab bars enhance the styling and add functionality to any Hydro Systems bathtub. Designed to be mounted on most flat or curved surfaces, these grab bars are designed for quick removal and remounting without access to the backside of the tub.
|
 |
|
Universal Grab Bars
Hydro Systems, Inc. has designed and developed a new, universal mount grab bar. Due to mounting design and angles, this bar affords a mounting solution in virtually any position on any tub. The classic Grab Bar often is limited in its mounting positions. An additional plus is that this Grab Bar has a button mount, allowing this Bar to be utilized in situations where the tubs are nested for shipping. Two small set screws are all that are needed to install these Bars. There are two different length Bars available - 5¾" and 7¾" - with the longer working nicely on the larger tubs.
|
|
|
|
Safety Suction Cover
The anti-vortex suction is a stylish safety feature, designed to prevent hair and foreign objects from becoming drawn in and trapped in the whirlpool system. The suction cover and all whirlpool system trim components are available in a wide array of colors and plated finishes to match or complement any color whirlpool bathtub you select. The plated option is electroplated over brass for a quality, durable, long-lasting finish and value.
|
